Log på Markedsindex.dk   
Opret blog   
Markedsindex.dk Markeder Butikker Debat Blogs
   Du er her: Markedsindex.dk -> Blogs -> Garden Flood Light -> The poles produced in this way are prone to shake or deform under strong winds
Oprettet 24. February 2021 kl. 01:40
0 kommentarer
Tip en ven

The poles produced in this way are prone to shake or deform under strong winds

The poles produced in this way are prone to shake or deform under strong winds. The most effective way to judge whether a street light pole meets the standard—weigh the weight. Welding of light poles Welding is one of the important links of the street lamp processing technology.When purchasing street lamps, buyers often pay more attention to the quality of the lamps and spend a lot of attention on style or brightness, thus neglecting the choice of lamp poles. There are good quality steels and there are naturally poor quality steels.

Light poles with unclear spray colors are also substandard products. Both galvanizing methods are for anti-corrosion and prolong the service life of street lamps. Learning to distinguish between cold galvanized and hot-dip galvanized will create favorable conditions for your journey to buy street lights. Therefore, the lamp pole welding must be strictly required. Fourth, the spraying of light poles The purpose of the light pole spray is to be beautiful and to prevent corrosion. To understand the manufacturer's production process, you must actually visit the factory. When unscrupulous street light manufacturers produce light poles, they use non-standard steel.

However, the thickness of non-standard steel is relatively thin. Hot-dip galvanizing is rough and silver-white, with process water lines and a few drips onled street light housing factory the surface, especially at one end of the workpiece. Choose regular products and stay away from unscrupulous manufacturers. Poor welding will eventually cause the lamp pole to break. You must pay attention to these aspects when choosing a high-quality light pole. High-quality light poles are safe and reliable, with a minimum lifespan of up to 25 years. In the remaining local areas, machine welding cannot be operated, so it must be done manually, which requires high technical requirements. Street lamp pole welding will use both machines and labor.

To One, the plate of the light pole Steel has high strength, strong plasticity, and good toughness. Cold galvanizing is smooth and bright, and the workpiece is free of zinc tumors or agglomeration. If you don’t know the specifications and weight of the light pole, it’s best to shop around

0 kommentarer

Du skal være logget ind for at skrive en kommentar

Indtast brugernavn


Indtast password

Glemt dit password? Opret et login her

Garden Flood Light

Se mere om bloggeren floodlight

Ningbo Geolide Illuminate Co., Ltd is China die casting led street lamps manufacturers and Led road lights suppliers, supply die cast Led road lights ...

Gå til bloggen Garden Flood Light

Læs min blog

Seneste indlæg

Til blogindlæget The surface temperature of the luminous body is too high

The surface temperature o...

The first thing Wholesale Die Casting Led Street Lights...

Til blogindlæget A large-scale manufacturer is better than a small-scale manufacturer

A large-scale manufacture...

To understand the scale of this LED street light manufac...

Til blogindlæget The street lamp has the advantages of outdoor use at night

The street lamp has the a...

The forced cooling method of installing a fan has a comp...

Til blogindlæget The poles produced in this way are prone to shake or deform under strong winds

The poles produced in thi...

The poles produced in this way are prone to shake or def...

Til blogindlæget Fluorescent lighting contains toxic materials

Fluorescent lighting cont...

LED lighting is truly the next generation technology whi...