Log på Markedsindex.dk   
Opret blog   
Markedsindex.dk Markeder Butikker Debat Blogs
   Du er her: Markedsindex.dk -> Blogs -> MaxT Custom DIP Switches -> The detection failure signal will be immediately sent to the stamping
   
boxpinheader
 | 
Oprettet 15. January 2021 kl. 05:47
 | 
0 kommentarer
 | 
Tip en ven

The detection failure signal will be immediately sent to the stamping

Only after the cause of the quality defect is identified and resolved, the operator can start the press to re-produce. Although the similar application examples are different due to the changes in the pins of the respective inspection objects, most of the stamping quality visual inspection systems follow the basically consistent overall structure. For example, in a typical example of quality inspection of stamping parts,

if the vision system detects a defective part, the detection failure signal will be immediately sent to the stamping machine controller to stop the stamping machine. Therefore, the detection speed has once again become an important system performance index. A type of problem similar to the stamping stage, such as twisting, chipping or deformation of the pin, will also appear when the stamped pin is fed into the electroplating equipment.

As mentioned earlier, the pins are stamped from thin metal strips.2 Material conveying and component composition of the stamping parts visual inspection system . There is indeed a related topic-detectable design. Origin Tool (Origin Tool) determines the position and angle of each pin in the camera's field of view, and provides this information to subsequent inspection tools.nsure that stamping parts are defect-free.

Although most Screw Terminal Blocks Factory lines have a cycle time of one to two pieces per second, the vision system usually needs to complete multiple different inspection items for each connector passing through the camera. Generally, it can be divided into the following four stages: Stamping Electroplating Injection molding (Molding) Assembly (Assembly) 2. Similar other solutions, such as controlling the spray gun to mark defective products, can also be easily implemented through the PPT vision system.



0 kommentarer


Du skal være logget ind for at skrive en kommentar


Indtast brugernavn

*

Indtast password

*
 
Glemt dit password? Opret et login her

MaxT Custom DIP Switches

Se mere om bloggeren boxpinheader

MAXT has passed IS09001 and IS014001 certifications, and its Custom DIP Switches have obtained UL, TUV, CE, CQC and other safety certifications. All p...

Gå til bloggen MaxT Custom DIP Switches

Læs min blog


Seneste indlæg

Til blogindlæget The needs of equipment designers who need to consider

The needs of equipment de...

The organization is already defining a 100Gb Ethernet st...

Til blogindlæget The detection failure signal will be immediately sent to the stamping

The detection failure sig...

Only after the cause of the quality defect is identified...

Til blogindlæget The drawing is mismatched during processing

The drawing is mismatched...

The terminal block connectors suppliers can be rotated...

Til blogindlæget Grounding systems and potential balance systems have an important impact

Grounding systems and pot...

Therefore, users should pay attention to the impact of e...


Arkiv